Ultrasonic Monitor TEK-733

Ultrasonic Monitor TEK-733 with GPS

Ultrasonic Monitor TEK-733

The TEK-733 Ultrasonic Monitor is intended for industrial applications. Mounted on the top of a tank it can measure the content of any non-pressurized tank and report the measurement to our tank monitoring solution. The unit is pre-configured and is equipped with a SIM card that sends it’s data to our tank monitoring online application. (TEK-733 is on available with 3G capabilities)

The unit does not have a local display.

It requires a monthly subscription to have access to this service, covering the cost for the hosting service, as well as the data transport cost.  For additional information, see Timitoo Tank Monitoring Cloud.

The sensor comes with a GPS unit built in and is therefore best suited for tanks that can change their location. The GPS coordinates are also written back into the application making it easy to track the units and the tanks they are mounted on.

Overview
  • Touchless measurement via Ultrasound
  • Remote fuel tank monitoring
  • Suitable for solid (Grains, Heating Pellets, …) and liquid tank contents (Diesel, Water, DEF, Oil, …)
  • Email notification in Alarm states
  • Simple installation
  • Long battery life
Additional Highlights
  • Great temperature range of operation: -20°C – +50°C (-22°F – 140°F)
  • Measurement distance: 20cm – 300cm (8 inch – 118 inch)
  • Battery life: 3 years
  • Accuracy of +/- 1 cm (< 1/2 inch)
  • Ultrasonic Range: 12cm to 4m (3 inch to 13ft)
  • Hourly measurement, transmitted every 4 hours
  • Protection: IP67 (outdoor)
  • Weight 520 grams (1.14 lbs)
  • Dimensions (101mm/4in x 93mm/3.6in x 150mm/5.9in)
FAQ
  • No FAQ’S yet…
    …

Please contact us for further questions: info@tankmonitoring.net