Electronic Tank Level Gauge – Smart Box 3

The Smart Box Series work for vented tanks using a pressure probe. Depending on the pressure probe the box can display, Liter, Gallons, Percent and remaining days of supply. With the probe cable the box can be up to 650 ft (200m) away from the probe.

The Smart Box 3 provides the same functionality as the Smart Box 2 and additionally provides an extra alarm on the box itself. The two additional Relais contacts can be used to switch external components, such as pumps or alarms.

Overview

Typically used for: Diesel, Heating Oil, Lubricants, Water, Waste Water, Diesel Engine Fluid
Hydrostatic content measurement
Local measurement and remote display up to 650ft (200m) away
Display in Liter, Gallons, cm of height or Percent

Main Features

Continuous measurement and display of the tank content level
Suitable for all tank shapes (a calibration table can be entered)
Simple programming
Power independent due to non-volatile RAM
High accuracy, depending on the probe up to 0,33 %
System can be tied into other monitoring systems and building management systems
Temperature measurement optionally
The Smartbox 2 additionally provides two switch exits with Open/Close contacts.
Data remote transfer possible via SmartBox 4 or SmartBox 5 (optional)

You can find this product in our Webshop:

12 Volt Version for indoor use: https://shop.tankmonitoring.net/smart-box-3-ip30-12v.html

24 Volt Version for indoor use: https://shop.tankmonitoring.net/smart-box-3-ip30-24v.html

Additional examples of application:

Smart Box 3 Application with Alarm